BD4732G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~75°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD47xx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 540mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.086V |
| Base Part Number | BD47 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Output Type | TTL |
| Max Output Current | 15mA |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 650mV |
| Operating Supply Current | 1.6μA |
| Nominal Supply Current | 1.6μA |
| Max Supply Current | 3μA |
| Adjustable Threshold | NO |
| Accuracy | 1 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.2V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 3.168V |
| Max Reset Threshold Voltage | 3.232V |
| Threshold Voltage | +3.2V |
| Length | 2.9mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4732G-TR Overview
It is mounted through 5 terminals on the power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are a lot of similarities between this IC management and other Voltage Detector products. There is a voltage supply of 3.086V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 1. The power management is mounted by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. 5 pins are present in total in this power management. 5 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 650mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~75°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. Supplied with a operating current of 1.6μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using BD47, the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 3μA. As the name implies, this supervisor is a kind of the famous BD47xx series product line.
BD4732G-TR Features
Voltage Detector type
Minimum supply voltage of 650mV
1.6μA operating supply current
BD4732G-TR Applications
There are a lot of ROHM Semiconductor BD4732G-TR Voltage Supervisors applications.
- Electrical fire monitoring system
- Battery cars
- Medical-specific insulation monitor
- Military communications
- Satellite navigation
- Automotive permanent magnet synchronous motors
- Sensitive sensors
- Electric heating appliances
- Military electronics
- Transformer load monitoring equipment
