BD4741G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~75°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD47xx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 540mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.968V |
| Base Part Number | BD47 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Output Type | TTL |
| Max Output Current | 15mA |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 650mV |
| Operating Supply Current | 1.6μA |
| Nominal Supply Current | 1.6μA |
| Max Supply Current | 3μA |
| Adjustable Threshold | NO |
| Accuracy | 1 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.1V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 4.059V |
| Max Reset Threshold Voltage | 4.141V |
| Threshold Voltage | +4.1V |
| Length | 2.9mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4741G-TR Overview
Power management is mounted through 5 terminals. Packaging is in the form of a Tape & Reel (TR). To assist you, this IC power includes 1 functions. This power management is made up of 1 channels which are available in a series format. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. Several of the benefits of this PMIC are also shared by other Voltage Detector products. A supply voltage of 3.968V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount is the one that mounts power management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, it has 5 pins on IC management. There are 5 pins on the power managment ic. It is recommended that Vsup should not be less than 650mV for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. Surface Mount mounting is recommended. We recommend setting the supervisors to -40°C~75°C TA degrees. The output voltage of this power managment ic during operation is Open Drain or Open Collector. There is a supply current of 1.6μA for the power management. A similar IC managements number of the manufacturer can always be found by using BD47, the base power ics number. The maximum supply temperature that PMIC chip can work with is 3μA. A PMIC from the well-known BD47xx series of products is being offered here.
BD4741G-TR Features
Voltage Detector type
Minimum supply voltage of 650mV
1.6μA operating supply current
BD4741G-TR Applications
There are a lot of ROHM Semiconductor BD4741G-TR Voltage Supervisors applications.
- Embedded computing
- Sensitive sensors
- Microcontroller system
- Personal computers
- Radio
- Display equipment
- Insulation fault location system
- Electrical fire monitoring system
- FPGA design
- Power distribution systems of operating room
