BD4825FVE-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD48xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 210mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Base Part Number | BD48 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 900nA |
| Max Supply Current | 1.53μA |
| Adjustable Threshold | NO |
| Accuracy | 1 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.5V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 2.463V |
| Max Reset Threshold Voltage | 2.538V |
| Threshold Voltage | +2.5V |
| Height Seated (Max) | 0.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4825FVE-TR Overview
There are 5 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). Power management is possible to find a series of 1 functions. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find SOT-665 functions for your reference. It is a IC power that shares many benefits with other products from the Voltage Detector line. The supervisor is always powered by a 2.3V volt supply. When 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 5 pins in it. There are 5 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 10V volts. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~105°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. As far as the supply current of the power management is concerned, it is 900nA. For similar manage ics search of the manufacturer, you can always refer to BD48, the base PMIC number. At the most, voltage supervisor can work with a supply temperature of 1.53μA. Located in the well-known BD48xxx series product line, this IC management is a kind of this series.
BD4825FVE-TR Features
Voltage Detector type
Minimum supply voltage of 1.2V
900nA operating supply current
BD4825FVE-TR Applications
There are a lot of ROHM Semiconductor BD4825FVE-TR Voltage Supervisors applications.
- Smart meter
- Solar power charger
- Military electronics
- Data storage applications
- Radar
- Efficient information transmission
- Medical-specific insulation monitor
- Automotive permanent magnet synchronous motors
- Detection of phase imbalance
- Power distribution systems of operating room
