banner_page

BD4826FVE-TR

2.4V5 Terminals 5-Pin BD48 Voltage supervisorBD48xxx Series 1 Channels Min -300mV Max 10V


  • Manufacturer: ROHM Semiconductor
  • Nocochips NO: 687-BD4826FVE-TR
  • Package: SOT-665
  • Datasheet: PDF
  • Stock: 256
  • Description: 2.4V5 Terminals 5-Pin BD48 Voltage supervisorBD48xxx Series 1 Channels Min -300mV Max 10V (Kg)

Details

Tags

Parameters
Number of Pins 5
Operating Temperature -40°C~105°C TA
Packaging Tape & Reel (TR)
Published 2005
Series BD48xxx
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Type Voltage Detector
Subcategory Power Management Circuits
Max Power Dissipation 100mW
Technology CMOS
Terminal Position DUAL
Terminal Form FLAT
Number of Functions 1
Supply Voltage 2.4V
Base Part Number BD48
Output Open Drain or Open Collector
Pin Count 5
Power Supplies 2.6V
Number of Channels 1
Max Supply Voltage 10V
Min Supply Voltage -300mV
Max Supply Current 1.53μA
Adjustable Threshold NO
Watchdog Timer No
Reset Active Low
Voltage - Threshold 2.6V
Number of Voltages Monitored 1
Min Reset Threshold Voltage 2.561V
Max Reset Threshold Voltage 2.639V
Threshold Voltage +2.6V
Height Seated (Max) 0.6mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SOT-665

BD4826FVE-TR Overview


This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels available on this supervisor, and each channel has a different function. Please refer to power management for SOT-665 functions. With power management, you get a lot of benefits that you won't find in other Voltage Detector products. When a supply voltage of 2.4V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 5. Pin count of the power management is 5. In order for this IC power to function, the supply voltage (Vsup) cannot be less than -300mV. This IC power should be powered by no more than 10V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. We recommend setting the supervisors to -40°C~105°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. To find similar IC managements from the manufacturer, you can always search by BD48. There is a requirement for 2.6V power to power this power management. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.53μA. The PMIC is a kind of the well-known BD48xxx series of products.

BD4826FVE-TR Features


Voltage Detector type
Minimum supply voltage of -300mV

BD4826FVE-TR Applications


There are a lot of ROHM Semiconductor BD4826FVE-TR Voltage Supervisors applications.

  • FPGA design
  • Solar power charger
  • Rechargeable batteries
  • Power communication system
  • Dash board
  • Automotive power systems
  • Precision measurement
  • Network equipment
  • emergency room
  • Battery cars

Write a review

Note: HTML is not translated!
    Bad           Good