BD4828FVE-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD48xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 210mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 2.6V |
| Base Part Number | BD48 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Power Supplies | 2.8V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 900nA |
| Max Supply Current | 1.53μA |
| Adjustable Threshold | NO |
| Accuracy | 1 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.8V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 2.758V |
| Max Reset Threshold Voltage | 2.842V |
| Threshold Voltage | +2.8V |
| Height Seated (Max) | 0.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4828FVE-TR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. There is a Tape & Reel (TR)-packaging method applied to IC management. To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please find attached SOT-665 functions for your reference in this IC power. There are many benefits that this IC power shares with other Voltage Detector products as well. When a supply voltage of 2.6V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. The mount is provided by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. It has a total of 5 pins that are attached to IC management. The pins of the power management system count 5. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~105°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supervisor's supply current is specified to 900nA. To find similar IC managements from the manufacturer, you can always search by BD48. To operate this power management, you will need at least 2.8V volts of power. The power management can work with a maximum supply temperature of 1.53μA. As you can see, this IC power comes from the well-known BD48xxx series of products.
BD4828FVE-TR Features
Voltage Detector type
Minimum supply voltage of 1.2V
900nA operating supply current
BD4828FVE-TR Applications
There are a lot of ROHM Semiconductor BD4828FVE-TR Voltage Supervisors applications.
- Data storage applications
- Radar
- Insulation fault location system
- Computer applications
- DVR
- Kitchen appliances
- Medical-specific isolation transformer
- Display equipment
- Microprocessor system
- Important electronics for automotive protection
