banner_page

BD4830FVE-TR

2.8V5 Terminals 5-Pin BD48 Voltage supervisorBD48xxx Series 1 Channels Min 950mV Max 10V


  • Manufacturer: ROHM Semiconductor
  • Nocochips NO: 687-BD4830FVE-TR
  • Package: SOT-665
  • Datasheet: PDF
  • Stock: 317
  • Description: 2.8V5 Terminals 5-Pin BD48 Voltage supervisorBD48xxx Series 1 Channels Min 950mV Max 10V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SOT-665
Number of Pins 5
Operating Temperature -40°C~105°C TA
Packaging Tape & Reel (TR)
Published 2005
Series BD48xxx
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Type Voltage Detector
Subcategory Power Management Circuits
Max Power Dissipation 100mW
Technology CMOS
Terminal Position DUAL
Terminal Form FLAT
Number of Functions 1
Supply Voltage 2.8V
Base Part Number BD48
Output Open Drain or Open Collector
Pin Count 5
Power Supplies 3V
Number of Channels 1
Max Supply Voltage 10V
Min Supply Voltage 950mV
Max Supply Current 1.53μA
Adjustable Threshold NO
Watchdog Timer No
Reset Active Low
Voltage - Threshold 3V
Number of Voltages Monitored 1
Min Reset Threshold Voltage 2.955V
Max Reset Threshold Voltage 3.045V
Threshold Voltage +3V
Height Seated (Max) 0.6mm
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

BD4830FVE-TR Overview


There are 5 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. For your reference, this IC power includes a list of 1 functions. This power management is made up of 1 channels which are available in a series format. As a reference, this IC power includes SOT-665 functions for your convenience. There are a lot of similarities between this IC power and other Voltage Detector products. A supply voltage of 2.8V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. In total, the power management has 5 pins in it. The pins of the power management system count 5. It is recommended that Vsup should not be less than 950mV for this IC power. The supply voltage (Vsup) should not exceed 10V volts in this IC power. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -40°C~105°C TA degrees. During operation, this power management system outputs Open Drain or Open Collector. You can always use BD48, the base supervisor number, to search for similar PMICs of the manufacturer. To operate this power management, you will need at least 3V volts of power. The maximum supply temperature voltage supervisor can handle is 1.53μA. Supervisors from the well-known BD48xxx series product line are featured in this PMIC.

BD4830FVE-TR Features


Voltage Detector type
Minimum supply voltage of 950mV

BD4830FVE-TR Applications


There are a lot of ROHM Semiconductor BD4830FVE-TR Voltage Supervisors applications.

  • Dash board
  • Insulation fault location system
  • Electrical fire monitoring system
  • Microcontroller system
  • Stable power system
  • Battery-powered equipment
  • Power distribution systems of ICU
  • Precision measurement
  • Military communications
  • Microprocessor system

Write a review

Note: HTML is not translated!
    Bad           Good