BD4833FVE-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD48xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 210mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 3.1V |
| Base Part Number | BD48 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 900nA |
| Max Supply Current | 1.68μA |
| Adjustable Threshold | NO |
| Accuracy | 1 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.3V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 3.251V |
| Max Reset Threshold Voltage | 3.35V |
| Threshold Voltage | +3.3V |
| Height Seated (Max) | 0.6mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4833FVE-TR Overview
There are 5 terminals on this power management that allow it to be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. As a reference, this IC power includes SOT-665 functions for your convenience. As with other Voltage Detector products, this IC management also offers a wide range of benefits. A supply voltage of 3.1V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 1. Surface Mount is the one that mounts power management. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 5 pins on the board. This power management has 5 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.2V. This IC power should be powered by no more than 10V volts of supply voltage (Vsup). The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: -40°C~105°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. Supplied with a operating current of 900nA, this PMIC is capable of fully function as specified. For similar manage ics search of the manufacturer, you can always refer to BD48, the base PMIC number. It is necessary to have 3.3V volts of power in order for this voltage supervisor to operate. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.68μA. Supervisors from the well-known BD48xxx series product line are featured in this PMIC.
BD4833FVE-TR Features
Voltage Detector type
Minimum supply voltage of 1.2V
900nA operating supply current
BD4833FVE-TR Applications
There are a lot of ROHM Semiconductor BD4833FVE-TR Voltage Supervisors applications.
- Power distribution systems of operating room
- Microcontroller system
- Transformer load monitoring equipment
- Detection of phase imbalance
- Cloud computing
- Magnetic resonance imaging
- Automotive power systems
- Set top box
- Network equipment
- Utility meter
