BD4838FVE-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD48xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 100mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Base Part Number | BD48 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Power Supplies | 4.8V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | -300mV |
| Max Supply Current | 1.68μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.8V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 3.743V |
| Max Reset Threshold Voltage | 3.857V |
| Threshold Voltage | +3.8V |
| Height Seated (Max) | 0.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4838FVE-TR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find SOT-665 functions for you to refer to. Several of the benefits of this PMIC are also shared by other Voltage Detector products. A supply voltage of 3.6V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 5 pins on power management. This power management has 5 pins. Supply voltage (Vsup) should be at least -300mV for this power management. The supply voltage (Vsup) should not exceed 10V volts in this IC power. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~105°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. If you want to search for similar IC managements of this manufacturer, you can always refer to BD48, which is the base power ics number. To operate this power management, you will need at least 4.8V volts of power. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.68μA. It is one of the well-known BD48xxx series power ic line.
BD4838FVE-TR Features
Voltage Detector type
Minimum supply voltage of -300mV
BD4838FVE-TR Applications
There are a lot of ROHM Semiconductor BD4838FVE-TR Voltage Supervisors applications.
- Radar
- FPGA design
- Detection of phase loss
- Solar power charger
- Microcontroller system
- DVR
- External alarm
- Automotive permanent magnet synchronous motors
- Stable power system
- Automotive power systems
