BD4839FVE-TR
| Parameters | |
|---|---|
| Max Supply Voltage | 10V |
| Min Supply Voltage | -300mV |
| Max Supply Current | 1.68μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.9V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 3.842V |
| Max Reset Threshold Voltage | 3.959V |
| Threshold Voltage | +3.9V |
| Height Seated (Max) | 0.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD48xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 100mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 3.7V |
| Base Part Number | BD48 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Power Supplies | 4.8V |
| Number of Channels | 1 |
BD4839FVE-TR Overview
There are 5 terminals connected to this power management, which makes it easy to mount. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please find attached SOT-665 functions for your reference in this IC power. Compared to other Voltage Detector products, this PMIC has a lot of benefits to offer. During operation, the power ic is supplied with a voltage of 3.7V. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 5 pins on IC management. 5 pins are on the supervisor. A voltage (Vsup) that doesn't fall below -300mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 10V volts. The recommended mounting type is Surface Mount. Temperature setting for the supervisors should be -40°C~105°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. If you want to search for similar IC managements of this manufacturer, you can always refer to BD48, which is the base power ics number. The power management must be powered by 4.8V volts to function properly. A maximum supply temperature of 1.68μA can be used. As you may know, this PMIC comes from the well-known BD48xxx series product line.
BD4839FVE-TR Features
Voltage Detector type
Minimum supply voltage of -300mV
BD4839FVE-TR Applications
There are a lot of ROHM Semiconductor BD4839FVE-TR Voltage Supervisors applications.
- Electric heating appliances
- Transformer load monitoring equipment
- Set top box
- Data storage applications
- Insulation fault location system
- Urban rail transit weak current power monitoring
- DSP
- Embedded computing
- Detection of phase imbalance
- Detection of phase sequence
