BD4840G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | BD48xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 150mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.8V |
| Base Part Number | BD48 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Power Supplies | 4V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 950mV |
| Nominal Supply Current | 900nA |
| Max Supply Current | 1.68μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 3.94V |
| Max Reset Threshold Voltage | 4.06V |
| Threshold Voltage | +4V |
| Length | 2.9mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4840G-TR Overview
As you can see, this power management is mounted through 5 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for SC-74A, SOT-753 functions. Several of the benefits of this PMIC are also shared by other Voltage Detector products. IC management conducts in a 3.8V-voltage supply. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 5 pins on power management. There are 5 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 950mV volts. This IC power should be powered by no more than 10V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~105°C TA. During operation, this power management system outputs Open Drain or Open Collector. To find similar IC managements from the manufacturer, you can always search by BD48. To be able to work, this power management requires 4V volts of power. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.68μA. A PMIC from the well-known BD48xxx series of products is being offered here.
BD4840G-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
BD4840G-TR Applications
There are a lot of ROHM Semiconductor BD4840G-TR Voltage Supervisors applications.
- Efficient information transmission
- Precision measurement
- Microcontroller system
- Power distribution systems of infant care room
- Transformer load monitoring equipment
- Data storage applications
- Radar
- Insulation fault location system
- Magnetic resonance imaging
- Household appliances
