BD4843FVE-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | BD48xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 100mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 4.1V |
| Base Part Number | BD48 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Power Supplies | 4.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 950mV |
| Nominal Supply Current | 900nA |
| Max Supply Current | 1.8μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.3V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 4.236V |
| Max Reset Threshold Voltage | 4.365V |
| Threshold Voltage | +4.3V |
| Height Seated (Max) | 0.6mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4843FVE-TR Overview
It is mounted through 5 terminals on the power management. Tape & Reel (TR)-packaging is used. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. IC management is packaged as a SOT-665 package. Several of the benefits of this PMIC are also shared by other Voltage Detector products. During operation, the power ic is supplied with a voltage of 4.1V. Power management conducts at a voltage of 1. The mount is provided by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. Power management has a total of 5 pins. Pin count of the power management is 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 950mV volts. The supply voltage (Vsup) should not exceed 10V volts in this IC power. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~105°C TA. Power management has an output of Open Drain or Open Collector during operation. If you want to search for similar IC managements of this manufacturer, you can always refer to BD48, which is the base power ics number. To be able to work, this power management requires 4.3V volts of power. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.8μA. As the name implies, this supervisor is a kind of the famous BD48xxx series product line.
BD4843FVE-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
BD4843FVE-TR Applications
There are a lot of ROHM Semiconductor BD4843FVE-TR Voltage Supervisors applications.
- Multi-voltage system
- Functional modules
- Personal computers
- Radar
- Medical-specific isolation transformer
- Military electronics
- Automotive power systems
- Power distribution systems of ICU
- Battery-powered equipment
- Utility meter
