BD4845FVE-TR
| Parameters | |
|---|---|
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD48xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 100mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 4.3V |
| Base Part Number | BD48 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | -300mV |
| Max Supply Current | 1.8μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.5V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 4.433V |
| Max Reset Threshold Voltage | 4.568V |
| Threshold Voltage | +4.5V |
| Height Seated (Max) | 0.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
BD4845FVE-TR Overview
As you can see, this power management is mounted through 5 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. To assist you, this IC power includes 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SOT-665 functions. As with other Voltage Detector products, this IC management also offers a wide range of benefits. IC management conducts in a 4.3V-voltage supply. Power ics operate at 1 supply voltages. The power management is mounted by a Surface Mount-axis. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 5 pins on the board. 5 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least -300mV, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~105°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. If you want to search for similar IC managements of this manufacturer, you can always refer to BD48, which is the base power ics number. The power management can work with a maximum supply temperature of 1.8μA. It is one of the well-known BD48xxx series power ic line.
BD4845FVE-TR Features
Voltage Detector type
Minimum supply voltage of -300mV
BD4845FVE-TR Applications
There are a lot of ROHM Semiconductor BD4845FVE-TR Voltage Supervisors applications.
- Detection of phase sequence
- External alarm
- Cloud computing
- Important electronics for automotive protection
- Battery cars
- Power distribution systems of infant care room
- Consumer electronics
- Electronics installed in the vehicle
- Detection of phase loss
- Power distribution systems of ICU
