BD4846FVE-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | BD48xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 100mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 4.4V |
| Base Part Number | BD48 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Power Supplies | 4.6V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 950mV |
| Max Supply Current | 1.8μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.6V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 4.531V |
| Max Reset Threshold Voltage | 4.669V |
| Threshold Voltage | +4.6V |
| Height Seated (Max) | 0.6mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4846FVE-TR Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 1 channels. As a reference, this IC power includes SOT-665 functions for your convenience. Compared to other Voltage Detector products, this PMIC has a lot of benefits to offer. When a supply voltage of 4.4V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 5. This power management system has 5 pins. It is recommended that Vsup should not be less than 950mV for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. The mounting type of the supervisors is Surface MountThis range of temperature should be set for the supervisors: -40°C~105°C TA. Power management has an output of Open Drain or Open Collector during operation. You can always use BD48, the base supervisor number, to search for similar PMICs of the manufacturer. In order to operate this power management, it requires 4.6V volts of power. At the most, voltage supervisor can work with a supply temperature of 1.8μA. The PMIC is a kind of the well-known BD48xxx series of products.
BD4846FVE-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
BD4846FVE-TR Applications
There are a lot of ROHM Semiconductor BD4846FVE-TR Voltage Supervisors applications.
- Automotive power systems
- Electronics installed in the vehicle
- Radar
- Telecommunications equipment
- Detection of phase loss
- Low voltage/high power - AI, GPU
- Leakage protection
- Refrigeration
- Household appliances
- Battery cars
