BD4848FVE-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD48xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 100mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 4.6V |
| Base Part Number | BD48 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Power Supplies | 4.8V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | -300mV |
| Max Supply Current | 1.8μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.8V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 4.728V |
| Max Reset Threshold Voltage | 4.872V |
| Threshold Voltage | +4.8V |
| Height Seated (Max) | 0.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4848FVE-TR Overview
There are 5 terminals connected to this power management, which makes it easy to mount. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. Please find attached SOT-665 functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Voltage Detector products. IC management conducts in a 4.6V-voltage supply. When 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. The power management system can be categorized as a Power Management Circuits chip. In total, it has 5 pins on IC management. This power management system has 5 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than -300mV. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 10V volts. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~105°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. If you want to search for similar IC managements of this manufacturer, you can always refer to BD48, which is the base power ics number. This power management requires 4.8V power to work. At the most, voltage supervisor can work with a supply temperature of 1.8μA. The PMIC is a kind of the well-known BD48xxx series of products.
BD4848FVE-TR Features
Voltage Detector type
Minimum supply voltage of -300mV
BD4848FVE-TR Applications
There are a lot of ROHM Semiconductor BD4848FVE-TR Voltage Supervisors applications.
- Analog circuit
- Power distribution systems of operating room
- Microcontroller system
- Smart meter
- Telecommunications equipment
- Sensitive sensors
- Electronics installed in the vehicle
- Solar power charger
- FPGA design
- Military electronics
