BD4852FVE-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD48xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 100mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | BD48 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Power Supplies | 4.8V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | -300mV |
| Max Supply Current | 1.8μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 5.2V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 5.122V |
| Max Reset Threshold Voltage | 5.278V |
| Threshold Voltage | +5.2V |
| Height Seated (Max) | 0.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4852FVE-TR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. This power ic is packaged in a way that looks like a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. In this IC management you will find SOT-665 functions for you to refer to. Several of the benefits of this PMIC are also shared by other Voltage Detector products. Manage ics operate at 5V supply voltages. Power ics operate at 1 supply voltages. Surface Mount is the one that mounts power management. A IC power such as this can be classified as a Power Management Circuits power management system. Power management has a total of 5 pins. 5 pins are on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than -300mV. This IC power should be powered by no more than 10V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~105°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. If you want to search for similar IC managements of this manufacturer, you can always refer to BD48, which is the base power ics number. This power management requires 4.8V power to work. The maximum supply temperature is 1.8μA. Located in the well-known BD48xxx series product line, this IC management is a kind of this series.
BD4852FVE-TR Features
Voltage Detector type
Minimum supply voltage of -300mV
BD4852FVE-TR Applications
There are a lot of ROHM Semiconductor BD4852FVE-TR Voltage Supervisors applications.
- Important electronics for automotive protection
- FPGA design
- Electrical fire monitoring system
- Electronics installed in the vehicle
- Power communication system
- Unattended substation automation
- Insulation fault location system
- Military electronics
- Analog circuit
- Battery cars
