BD4856FVE-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD48xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 100mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 5.4V |
| Base Part Number | BD48 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | -300mV |
| Max Supply Current | 1.98μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 5.6V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 5.516V |
| Max Reset Threshold Voltage | 5.684V |
| Threshold Voltage | +5.6V |
| Height Seated (Max) | 0.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4856FVE-TR Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Packaging is in the form of a Tape & Reel (TR). Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes SOT-665 functions. Several of the benefits of this PMIC are also shared by other Voltage Detector products. IC management conducts at a voltage of 5.4V. Power management conducts at a voltage of 1. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, IC powers are 5 pins on the board. 5 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than -300mV volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~105°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. It is always advisable to use BD48, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 1.98μA can be used. The IC power comes from the well-known BD48xxx series.
BD4856FVE-TR Features
Voltage Detector type
Minimum supply voltage of -300mV
BD4856FVE-TR Applications
There are a lot of ROHM Semiconductor BD4856FVE-TR Voltage Supervisors applications.
- DSP
- Automotive power systems
- Power distribution systems of CCU
- Utility meter
- DVR
- Battery cars
- Electrical fire monitoring system
- Radio
- Urban rail transit weak current power monitoring
- WiFi router
