BD4857FVE-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD48xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 100mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 5.5V |
| Base Part Number | BD48 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | -300mV |
| Max Supply Current | 1.98μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 5.7V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 5.615V |
| Max Reset Threshold Voltage | 5.786V |
| Threshold Voltage | +5.7V |
| Height Seated (Max) | 0.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4857FVE-TR Overview
There are 5 terminals connected to this power management, which makes it easy to mount. There is a Tape & Reel (TR)-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. Please find attached SOT-665 functions for your reference in this IC power. As with other Voltage Detector products, this IC management also offers a wide range of benefits. There is a voltage supply of 5.5V for the PMIC chip, and the chip conducts at that voltage. IC management conducts in a 1-voltage supply. The power management is mounted by a Surface Mount-axis. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 5 pins on power management. The pins of the power management system count 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least -300mV, which is the minimum supply voltage that should be applied. There should be no more than 10V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~105°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. A similar IC managements number of the manufacturer can always be found by using BD48, the base power ics number. Voltage supervisor can work with a supply temperature of 1.98μA at the most. The IC power comes from the well-known BD48xxx series.
BD4857FVE-TR Features
Voltage Detector type
Minimum supply voltage of -300mV
BD4857FVE-TR Applications
There are a lot of ROHM Semiconductor BD4857FVE-TR Voltage Supervisors applications.
- Dash board
- Data storage applications
- Embedded computing
- Detection of phase sequence
- Leakage current detection
- Power distribution systems of infant care room
- Personal computers
- Computer applications
- DVR
- WiFi router
