BD4860FVE-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD48xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 210mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 5.8V |
| Base Part Number | BD48 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Power Supplies | 6V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 900nA |
| Max Supply Current | 1.98μA |
| Adjustable Threshold | NO |
| Accuracy | 1 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 6V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 5.91V |
| Max Reset Threshold Voltage | 6.09V |
| Threshold Voltage | +6V |
| Height Seated (Max) | 0.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4860FVE-TR Overview
A total of 5 terminals are used to mount this power management. There is a Tape & Reel (TR)-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. In this IC management you will find SOT-665 functions for you to refer to. As with other Voltage Detector products, this IC management also offers a wide range of benefits. There is a voltage supply of 5.8V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by a Surface Mount-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. A total of 5 pins are located on this power management. 5 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.2V volts. Voltage (Vsup) shouldn't exceed 10V volts in this PMIC. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~105°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. For this power management, there is an 900nA volt supply current. A similar IC managements number of the manufacturer can always be found by using BD48, the base power ics number. The power management must be powered by 6V volts to function properly. The maximum supply temperature that PMIC chip can work with is 1.98μA. As the name implies, this supervisor is a kind of the famous BD48xxx series product line.
BD4860FVE-TR Features
Voltage Detector type
Minimum supply voltage of 1.2V
900nA operating supply current
BD4860FVE-TR Applications
There are a lot of ROHM Semiconductor BD4860FVE-TR Voltage Supervisors applications.
- Power distribution systems of infant care room
- Sensitive sensors
- Dash board
- Data storage applications
- Urban rail transit weak current power monitoring
- WiFi router
- FPGA design
- Electric heating appliances
- Cloud computing
- External alarm
