BD4924FVE-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | BD49xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 210mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 2.2V |
| Base Part Number | BD49 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Power Supplies | 2.4V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 900nA |
| Nominal Supply Current | 900nA |
| Max Supply Current | 1.53μA |
| Adjustable Threshold | NO |
| Accuracy | 1 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.4V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 2.364V |
| Max Reset Threshold Voltage | 2.436V |
| Threshold Voltage | +2.4V |
| Height Seated (Max) | 0.6mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4924FVE-TR Overview
As you can see, this power management is mounted through 5 terminals. Power management is packaged in a Tape & Reel (TR) way. The purpose of this IC management is to provide you with a reference of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. IC management is packaged as a SOT-665 package. Several of the benefits of this PMIC are also shared by other Voltage Detector products. When 2.2V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 5 pins on IC management. This power management system has 5 pins. It is recommended that Vsup should not be less than 1.2V for this IC power. There should be no more than 10V volts of supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. We recommend setting the supervisors to -40°C~105°C TA degrees. During operation, this power management system outputs Push-Pull, Totem Pole. The supply current of the power management is 900nA. If you want to search for similar IC managements of this manufacturer, you can always refer to BD49, which is the base power ics number. In order to operate this power management, it requires 2.4V volts of power. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.53μA. It is one of the well-known BD49xxx series power ic line.
BD4924FVE-TR Features
Voltage Detector type
Minimum supply voltage of 1.2V
900nA operating supply current
BD4924FVE-TR Applications
There are a lot of ROHM Semiconductor BD4924FVE-TR Voltage Supervisors applications.
- FPGA design
- Power distribution systems of ICU
- Detection of phase sequence
- Detection of phase imbalance
- Household appliances
- Electric heating appliances
- Magnetic resonance imaging
- Microprocessor system
- Fire equipment power monitoring system
- Functional modules
