BD4925FVE-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Series | BD49xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 100mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Base Part Number | BD49 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | -300mV |
| Max Supply Current | 1.53μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.5V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 2.463V |
| Max Reset Threshold Voltage | 2.538V |
| Threshold Voltage | +2.5V |
| Height Seated (Max) | 0.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4925FVE-TR Overview
A total of 5 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for SOT-665 functions. Several of the benefits of this PMIC are also shared by other Voltage Detector products. Manage ics operate at 2.3V supply voltages. Power ics operate at 1 supply voltages. The power management is mounted by a Surface Mount-axis. This power ic can be sub-categorized as Power Management Circuits. In total, it has 5 pins on IC management. 5 pins make up the power management. Supply voltage (Vsup) should be at least -300mV for this power management. There should be no more than 10V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~105°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. You can always use BD49, the base supervisor number, to search for similar PMICs of the manufacturer. The power management can work with a maximum supply temperature of 1.53μA. The IC power comes from the well-known BD49xxx series.
BD4925FVE-TR Features
Voltage Detector type
Minimum supply voltage of -300mV
BD4925FVE-TR Applications
There are a lot of ROHM Semiconductor BD4925FVE-TR Voltage Supervisors applications.
- Power distribution systems of operating room
- Urban rail transit weak current power monitoring
- Medical-specific insulation monitor
- Precision measurement
- Detection of phase imbalance
- Smart meter
- Refrigeration
- Detection of phase sequence
- Embedded computing
- Military communications
