banner_page

BD4926FVE-TR

2.4V5 Terminals 5-Pin BD49 Voltage supervisorBD49xxx Series 1 Channels Min -300mV Max 10V


  • Manufacturer: ROHM Semiconductor
  • Nocochips NO: 687-BD4926FVE-TR
  • Package: SOT-665
  • Datasheet: PDF
  • Stock: 830
  • Description: 2.4V5 Terminals 5-Pin BD49 Voltage supervisorBD49xxx Series 1 Channels Min -300mV Max 10V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SOT-665
Number of Pins 5
Operating Temperature -40°C~105°C TA
Packaging Tape & Reel (TR)
Published 2002
Series BD49xxx
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Type Voltage Detector
Subcategory Power Management Circuits
Max Power Dissipation 100mW
Technology CMOS
Terminal Position DUAL
Terminal Form FLAT
Number of Functions 1
Supply Voltage 2.4V
Base Part Number BD49
Output Push-Pull, Totem Pole
Pin Count 5
Power Supplies 2.6V
Number of Channels 1
Max Supply Voltage 10V
Min Supply Voltage -300mV
Max Supply Current 1.53μA
Adjustable Threshold NO
Watchdog Timer No
Reset Active Low
Voltage - Threshold 2.6V
Number of Voltages Monitored 1
Min Reset Threshold Voltage 2.561V
Max Reset Threshold Voltage 2.639V
Threshold Voltage +2.6V
Height Seated (Max) 0.6mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

BD4926FVE-TR Overview


Power management is mounted through 5 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. This power managment ic consists of 1 channels, each of which can be used independently. There are SOT-665 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Voltage Detector products. When 2.4V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. By Surface Mount, IC management has been mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 5. There are 5 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than -300mV. The supply voltage (Vsup) should not exceed 10V volts in this IC power. Surface Mount mounting is recommended. We recommend setting the supervisors to -40°C~105°C TA degrees. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. If you want to search for similar IC managements of this manufacturer, you can always refer to BD49, which is the base power ics number. To operate this power management, you will need at least 2.6V volts of power. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.53μA. Supervisors from the well-known BD49xxx series product line are featured in this PMIC.

BD4926FVE-TR Features


Voltage Detector type
Minimum supply voltage of -300mV

BD4926FVE-TR Applications


There are a lot of ROHM Semiconductor BD4926FVE-TR Voltage Supervisors applications.

  • Important electronics for automotive safety
  • Sensitive sensors
  • Detection of phase imbalance
  • Military electronics
  • Multi-voltage system
  • Personal computers
  • Power distribution systems of CCU
  • Microcontroller system
  • Urban rail transit weak current power monitoring
  • Refrigeration

Write a review

Note: HTML is not translated!
    Bad           Good