BD4927FVE-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Series | BD49xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 100mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | BD49 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Power Supplies | 2.7V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 950mV |
| Max Supply Current | 1.53μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.7V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 2.66V |
| Max Reset Threshold Voltage | 2.741V |
| Threshold Voltage | +2.7V |
| Height Seated (Max) | 0.6mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4927FVE-TR Overview
There are 5 terminals on this power management that allow it to be mounted. A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. This power management is made up of 1 channels which are available in a series format. As a reference, this IC power includes SOT-665 functions for your convenience. Compared to other Voltage Detector products, this PMIC has a lot of benefits to offer. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. The power management system can be categorized as a Power Management Circuits chip. There are a total of 5 pins on power management. 5 pins are present on the power management system. A voltage (Vsup) that doesn't fall below 950mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~105°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. You can always use BD49, the base supervisor number, to search for similar PMICs of the manufacturer. A power supply of 2.7V watts is required for the operation of this power management. The maximum supply temperature is 1.53μA. The PMIC is a kind of the well-known BD49xxx series of products.
BD4927FVE-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
BD4927FVE-TR Applications
There are a lot of ROHM Semiconductor BD4927FVE-TR Voltage Supervisors applications.
- Computer applications
- Automotive permanent magnet synchronous motors
- Battery cars
- Digitally controlled LDO regulators circuit
- Fire equipment power monitoring system
- Data storage applications
- Detection of phase loss
- Low voltage/high power - AI, GPU
- Unattended substation automation
- Medical-specific insulation monitor
