banner_page

BD4928FVE-TR

2.6V5 Terminals 5-Pin BD49 Voltage supervisorBD49xxx Series 1 Channels Min -300mV Max 10V


  • Manufacturer: ROHM Semiconductor
  • Nocochips NO: 687-BD4928FVE-TR
  • Package: SOT-665
  • Datasheet: PDF
  • Stock: 882
  • Description: 2.6V5 Terminals 5-Pin BD49 Voltage supervisorBD49xxx Series 1 Channels Min -300mV Max 10V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SOT-665
Number of Pins 5
Operating Temperature -40°C~105°C TA
Packaging Tape & Reel (TR)
Published 2002
Series BD49xxx
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Type Voltage Detector
Subcategory Power Management Circuits
Max Power Dissipation 100mW
Technology CMOS
Terminal Position DUAL
Terminal Form FLAT
Number of Functions 1
Supply Voltage 2.6V
Base Part Number BD49
Output Push-Pull, Totem Pole
Pin Count 5
Power Supplies 2.8V
Number of Channels 1
Max Supply Voltage 10V
Min Supply Voltage -300mV
Max Supply Current 1.53μA
Adjustable Threshold NO
Watchdog Timer No
Reset Active Low
Voltage - Threshold 2.8V
Number of Voltages Monitored 1
Min Reset Threshold Voltage 2.758V
Max Reset Threshold Voltage 2.842V
Threshold Voltage +2.8V
Height Seated (Max) 0.6mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

BD4928FVE-TR Overview


There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for SOT-665 functions. With power management, you get a lot of benefits that you won't find in other Voltage Detector products. A supply voltage of 2.6V is used to conduct the PMIC chip. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. Power management has a total of 5 pins. Power managment ic pin count is 5. In order for this IC power to function, the supply voltage (Vsup) cannot be less than -300mV. There should be no more than 10V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~105°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. For similar manage ics search of the manufacturer, you can always refer to BD49, the base PMIC number. In order to operate this power management, it requires 2.8V volts of power. At most, voltage supervisor can operate at a supply temperature of 1.53μA. It is one of the well-known BD49xxx series power ic line.

BD4928FVE-TR Features


Voltage Detector type
Minimum supply voltage of -300mV

BD4928FVE-TR Applications


There are a lot of ROHM Semiconductor BD4928FVE-TR Voltage Supervisors applications.

  • Low voltage/high power - AI, GPU
  • Leakage protection
  • Battery cars
  • FPGA design
  • Power distribution systems of ICU
  • Set top box
  • Medical-specific isolation transformer
  • emergency room
  • Household appliances
  • Functional modules

Write a review

Note: HTML is not translated!
    Bad           Good