BD4932G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | BD49xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 150mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | BD49 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Power Supplies | 3.2V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | -300mV |
| Max Supply Current | 1.68μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.2V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 3.152V |
| Max Reset Threshold Voltage | 3.248V |
| Threshold Voltage | +3.2V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4932G-TR Overview
There are 5 terminals on this power management that allow it to be mounted. Power management is packaged in a Tape & Reel (TR) way. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. This IC power shares lots of benefits with other Voltage Detector products. A supply voltage of 3V is used to conduct the PMIC chip. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. Power management has a total of 5 pins. This power management system has 5 pins. There should be a minimum voltage supply (Vsup) of -300mV for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. You should set the supervisor's temperature during -40°C~105°C TA . When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. A similar IC managements number of the manufacturer can always be found by using BD49, the base power ics number. It requires 3.2V watts of power to operate this voltage supervisor. A maximum supply temperature of 1.68μA can be used with this power management. A PMIC from the well-known BD49xxx series of products is being offered here.
BD4932G-TR Features
Voltage Detector type
Minimum supply voltage of -300mV
BD4932G-TR Applications
There are a lot of ROHM Semiconductor BD4932G-TR Voltage Supervisors applications.
- External alarm
- Smartphones
- Cloud computing
- Transformer load monitoring equipment
- Medical-specific isolation transformer
- Electric heating appliances
- Dash board
- Set top box
- Satellite navigation
- Refrigeration
