BD4934FVE-TR
| Parameters | |
|---|---|
| Max Power Dissipation | 100mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 3.2V |
| Base Part Number | BD49 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Power Supplies | 3.4V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | -300mV |
| Max Supply Current | 1.68μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.4V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 3.349V |
| Max Reset Threshold Voltage | 3.451V |
| Threshold Voltage | +3.4V |
| Height Seated (Max) | 0.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Series | BD49xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
BD4934FVE-TR Overview
There are 5 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. IC management is packaged as a SOT-665 package. Compared to other Voltage Detector products, this PMIC has a lot of benefits to offer. There is a voltage supply of 3.2V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. A total of 5 pins are located on this power management. There are 5 pins on the power managment ic. Supply voltage (Vsup) should be at least -300mV for this power management. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 10V volts. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~105°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. It is always advisable to use BD49, the base supervisor number, when searching for similar PMICs from the manufacturer. To operate this power management, you will need at least 3.4V volts of power. The power management can work with a maximum supply temperature of 1.68μA. The PMIC is a kind of the well-known BD49xxx series of products.
BD4934FVE-TR Features
Voltage Detector type
Minimum supply voltage of -300mV
BD4934FVE-TR Applications
There are a lot of ROHM Semiconductor BD4934FVE-TR Voltage Supervisors applications.
- Microprocessor system
- Sensitive sensors
- Magnetic resonance imaging
- Military electronics
- Set top box
- Automotive power systems
- Embedded computing
- Microcontroller system
- Electrical fire monitoring system
- Refrigeration
