banner_page

BD555A1AFV-E2

0.635mm Copper, Tin PMIC 14 Pin 100kHz 16V 14-LSSOP (0.173, 4.40mm Width)


  • Manufacturer: ROHM Semiconductor
  • Nocochips NO: 687-BD555A1AFV-E2
  • Package: 14-LSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 782
  • Description: 0.635mm Copper, Tin PMIC 14 Pin 100kHz 16V 14-LSSOP (0.173, 4.40mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Copper, Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-LSSOP (0.173, 4.40mm Width)
Number of Pins 14
Operating Temperature -40°C~100°C TA
Packaging Cut Tape (CT)
Published 2012
Part Status Discontinued
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Type AC DC Offline Switcher
Subcategory Display Drivers
Terminal Position DUAL
Terminal Form GULL WING
Supply Voltage 16V
Terminal Pitch 0.635mm
Frequency 100kHz
Number of Outputs 1
Max Output Current 800mA
Max Supply Voltage 38V
Topology Step-Down (Buck)
Internal Switch(s) No
Voltage - Supply (Min) 10V
RoHS Status ROHS3 Compliant

BD555A1AFV-E2 Overview


To save space on the board, it has a 14-LSSOP (0.173, 4.40mm Width) package. LED drivers designed using this technology use 1 outputs.It is possible to mount the led driver using Surface Mount.It emerges as a AC DC Offline Switcher with high efficiency.It is capable of operating at a temperature of -40°C~100°C TA. It operates based on the frequency of 100kHz.It operates with 14 terminations.To form its configuration, 14 pins are used.It is possible for undetermined failures to occur if the voltage supply is lower than 10V.I have mounted it by Surface Mount.An acceptable maximum value for the supply voltage is 38V.Further, its characteristics allow it to be classified as Display Drivers.A LED driver that operates at 800mA output current provides all the benefits of a LED driver.

BD555A1AFV-E2 Features


Available in the 14-LSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~100°C TA
Frequency of 100kHz
Supply voltage of 16V

BD555A1AFV-E2 Applications


There are a lot of ROHM Semiconductor BD555A1AFV-E2 LED Driver ICs applications.

  • Constant Voltage Power Source for portable equipment
  • White LED Backlight for portable equipment
  • OLED power supply for portable equipment
  • LED Lighting PFCs, Linear Dimmable
  • General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
  • Street lighting
  • Medical surgery lighting
  • Replacement lamps
  • LED Lightings for Industrial Equipment
  • Auxiliary lights for on-vehicle cameras

Write a review

Note: HTML is not translated!
    Bad           Good