BD6155FVM-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~75°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 350mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.635mm |
| Frequency | 120kHz |
| Base Part Number | BD6155 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3.6V |
| Voltage - Output | 5.6V |
| Topology | Switched Capacitor (Charge Pump) |
| Current - Output / Channel | 80mA |
| Internal Switch(s) | Yes |
| Voltage - Supply (Min) | 2.9V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
BD6155FVM-TR Overview
Its 8-VSSOP, 8-MSOP (0.118, 3.00mm Width) package is used to save board space. Using this LED driver, there are 1 outputs.The mounting method adopted is Surface Mount.With high efficiency and reliable performance, it emerges as a DC DC Regulator.-25°C~75°C TA is a valid operating temperature for the led driver.It provides considerable benefits for Backlight.As a result, it operates based on the frequency of 120kHz.In this case, it uses 8 terminations.This configuration is built upon 8 pins.If the voltage supply is below 2.9V, undetermined failures may occur.The device has been mounted on the Surface Mount.You can find this LED driver under the base part number BD6155.It produces a voltage of 5.6V volts.It is also classified into Display Drivers according to its characteristics.It is necessary to have 5.5V voltages inside systems to power them.
BD6155FVM-TR Features
Available in the 8-VSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -25°C~75°C TA
Frequency of 120kHz
Supply voltage of 3.6V
Operating with the supply voltage of 5.5V
BD6155FVM-TR Applications
There are a lot of ROHM Semiconductor BD6155FVM-TR LED Driver ICs applications.
- Auxiliary lights for on-vehicle cameras
- Panel lighting
- Portable lighting
- LED backlight driver for LCD displays for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Replacement lamps
- Street lighting
- Flicker-free LED Lighting using R1580N
- Refrigeration lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
