BD6380EFV-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VSSOP (0.220, 5.60mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -25°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Applications | Battery Powered |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | BD638* |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | Parallel |
| Operating Supply Current | 1.6mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 500mA |
| Logic Function | AND |
| Supply Current-Max (Isup) | 3mA |
| Collector Emitter Voltage (VCEO) | 15V |
| Max Collector Current | 1A |
| Voltage - Load | 4V~13.5V |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Height | 850μm |
| Length | 7.8mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD6380EFV-E2 Overview
The design includes a package of type [0].Drivers controllers is packaged wDrivers controllersh a 24-VSSOP (0.220, 5.60mm Width) Exposed Pad case.Ideally, the part should be mounted by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in Battery Powered.The device is capable of supplying a voltage of 2.5V~5.5V volts.Drivers controllers operates wDrivers controllershin a range of -25°C~150°C TJdegrees Celsius.In this part, there are 24 terminations available.A voltage of 4V~13.5Vcan be applied to the load.You should run this amplifier at 3.3V.In terms of mounting, it is recommended that it be mounted in Surface Mount.Ensure that the part output current remains at 500mA.As a result of the BD638*part number, it can be found.24pins are available on the device.The Motion Control Electronicsseries contains it.1outputs are available.This motor type can be recognized as Stepper.For its operation, a supply current of 1.6mAis used.
BD6380EFV-E2 Features
Applications : Battery Powered
Load voltage across the chip 4V~13.5V
base on BD638* number
designed with 1 outputs
Motor Type classified as Stepper
BD6380EFV-E2 Applications
There are a lot of ROHM Semiconductor BD6380EFV-E2 motor drivers applications.
- Building technology
- Home lighting systems
- Step-up or step-down driver topologies
- parking lights
- Scanning equipment
- Horticultural applications
- CHMSL (center high-mount stop lamps)
- A cross between entertainment
- Automotive applications
- Alternative to HID lights
