BD6383EFV-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-VSSOP (0.213, 5.40mm Width) Exposed Pad |
| Number of Pins | 40 |
| Operating Temperature | -25°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 10V~28V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Base Part Number | BD638* |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Supply Voltage-Min (Vsup) | 10V |
| Interface | Parallel |
| Nominal Supply Current | 4.5mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 700mA |
| Supply Current-Max (Isup) | 10mA |
| Voltage - Load | 10V~28V |
| Motor Type | Stepper |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4 |
| Height | 850μm |
| Length | 13.6mm |
| Width | 5.4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD6383EFV-E2 Overview
This package is designed to work with [0].A 40-VSSOP (0.213, 5.40mm Width) Exposed Padcase is included with the part.Mounting the part by Surface Mountis recommended.I believe it would be suitable for the component connected to General Purpose.There is a capability for the device to provide 10V~28V volts.There is a temperature range of -25°C~150°C TJin which this device operates.A motor of this type can be categorized as Brushed DC.There are 40 terminations available on this part.In this case, the voltage can be applied to the load at the rate of 10V~28V.Drivers controllers is important to note that this amplifier should be operated at the 24Vsetting.In terms of mounting, it is recommended that it be mounted in Surface Mount.Maintain a current of 700mA for the part output.According to the BD638*part number, the part is found.There are 40 pins on it.This is part of the Motion Control Electronics series.2outputs are available.Stepperrepresents the motor type.
BD6383EFV-E2 Features
Applications : General Purpose
Load voltage across the chip 10V~28V
base on BD638* number
designed with 2 outputs
Motor Type classified as Stepper
BD6383EFV-E2 Applications
There are a lot of ROHM Semiconductor BD6383EFV-E2 motor drivers applications.
- Alternative to HID lights
- Footwell lighting
- Horticultural applications
- Human-centric lighting
- Turn signals
- Automotive applications
- General lighting
- Smart lighting applications
- Matrix LED dimmers
- Multiple output capability
