BD6385EFV-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-VSSOP (0.213, 5.40mm Width) Exposed Pad |
| Number of Pins | 40 |
| Operating Temperature | -25°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Applications | General Purpose |
| Technology | DMOS |
| Voltage - Supply | 10V~28V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Base Part Number | BD638* |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Supply Voltage-Max (Vsup) | 28V |
| Supply Voltage-Min (Vsup) | 10V |
| Interface | Parallel |
| Nominal Supply Current | 4.5mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1.2A |
| Logic Function | AND |
| Voltage - Load | 10V~28V |
| Motor Type | Stepper |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4 |
| Height | 850μm |
| Length | 13.6mm |
| Width | 5.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD6385EFV-E2 Overview
The design includes a package of type [0].There is 40-VSSOP (0.213, 5.40mm Width) Exposed Pad case included with the part.Surface Mountshould be used for mounting the part.In this case, it is appropriate for the component connected to General Purpose.There is a possibility of providing 10V~28Vvolts through the device.Operation temperature ranges from -25°C~150°C TJ.This motor type can be categorized as Brushed DC.The part has 40terminations available.Drivers controllers is possible to apply voltage at a rate of 10V~28Vto the load.I would like to remind you that this amplifier should be operated at 24V.The recommended mounting method is Surface Mount.Drivers controllers is recommended to keep the part output current at 1.2A.BD638*is the part number that finds it.40pins are present on the device.There are 4 outputs available.Stepperrepresents the motor type.
BD6385EFV-E2 Features
Applications : General Purpose
Load voltage across the chip 10V~28V
base on BD638* number
designed with 4 outputs
Motor Type classified as Stepper
BD6385EFV-E2 Applications
There are a lot of ROHM Semiconductor BD6385EFV-E2 motor drivers applications.
- Accurate LED current matching
- Building technology
- Monitoring the energy that the luminaire uses
- Outdoor area lights
- Industrial high-bay lights
- LED bias
- Hazardous application
- Handheld devices
- Architectural lighting
- Emergency lighting
