BD6387EFV-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-VSSOP (0.213, 5.40mm Width) Exposed Pad |
| Number of Pins | 40 |
| Operating Temperature | -25°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Applications | General Purpose |
| Technology | DMOS |
| Voltage - Supply | 10V~28V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Base Part Number | BD638* |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Supply Voltage-Min (Vsup) | 10V |
| Interface | Parallel |
| Nominal Supply Current | 4.5mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1.7A |
| Voltage - Load | 10V~28V |
| Motor Type | Stepper |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4 |
| Height Seated (Max) | 1mm |
| Length | 13.6mm |
| Width | 5.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD6387EFV-E2 Overview
The package is designed with [0].There is 40-VSSOP (0.213, 5.40mm Width) Exposed Pad case included with the part.Drivers controllers is recommended that the part be mounted by Surface Mount.I believe it would be suitable for the component connected to General Purpose.The device is capable of supplying a voltage of 10V~28V volts.There is a temperature range of -25°C~150°C TJin which this device operates.This motor type can be categorized as Brushed DC.There are 40 terminations available on this part.At a rate of [0], voltage can be applied to the load.I would like to remind you that this amplifier should be operated at 24V.There is Surface Mount recommended mounting method for this device.Maintain a current of 1.7A for the part output.Using the BD638*part number, it is located.This device is designed with a pin count of 40.There are 2 outputs available.A motor type of Steppercan be recognized.
BD6387EFV-E2 Features
Applications : General Purpose
Load voltage across the chip 10V~28V
base on BD638* number
designed with 2 outputs
Motor Type classified as Stepper
BD6387EFV-E2 Applications
There are a lot of ROHM Semiconductor BD6387EFV-E2 motor drivers applications.
- Automotive instrumentation
- Human-centric lighting
- High power LED street light
- parking lights
- Telltale lights
- General lighting
- Home lighting systems
- Mobile phone display backlight and key light driving
- Step-up or step-down driver topologies
- Matrix LED dimmers
