BD6510F-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 560mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Base Part Number | BD651* |
| Number of Outputs | 2 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Power Supplies | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 560mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Max Output Voltage | 6.3V |
| Switch Type | General Purpose |
| Output Current per Channel | 1A |
| Nominal Input Voltage | 5.5V |
| Min Output Voltage | -300mV |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 100m Ω |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD6510F-E2 Overview
Tape & Reel (TR) is how it's packaged.It is included with the 8-SOIC (0.173, 4.40mm Width) package as well.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type it owns.It is recommended that the temperature be set to -25°C~85°C TA for reliable performance.By default, it is set to output 2.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It has a total of Status Flag features.It belongs to the family BD651*.A total of 8 terminations can be found in it.The operation is carried out using the 8 pins.It is necessary to reduce the maximum output current to 1A to meet the operation criteria.Using a voltage of 5V allows for high efficiency.Surface Mount is mounted in the way of this LED driving board.Currently, the LED driving board has 100mOhm resistance.This case results in a 500mA output current.It is self-contained in an econtainer with a capacity of Peripheral Drivers.This part has a power supply of 5V.
BD6510F-E2 Features
Supplied from 5V
Resistance of 100mOhm
BD6510F-E2 Applications
There are a lot of ROHM Semiconductor BD6510F-E2 Power Switches ICs applications.
- Smartphone and PDA
- Portable/Handheld Devices
- HDD, SSD
- Gaming
- Various applications equipped with buttons
- Hot Swap
- Storage Drives
- Low Voltage I/O System Power
- Wireless Headsets
- Set-top-box
