BD6513F-E2
| Parameters | |
|---|---|
| Max Output Current | 600mA |
| Power Supplies | 5V |
| Temperature Grade | OTHER |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Nominal Supply Current | 85μA |
| Output Current | 500mA |
| Output Power | 560mW |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 500mA |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 2 |
| Turn On Time | 6000 µs |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 8 |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Additional Feature | CONTROL LOGIC: ACTIVE LOW |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 560mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 8 |
| Output Voltage | 6.3V |
BD6513F-E2 Overview
Tape & Reel (TR) is the way it's packaged.The SOP package includes it.As a result, there are 8 terminations.During operation, the 8 pins are used.As far as functions are concerned, the lighting driver has 2.Maximum output current falls to 600mA when operation criteria are met.With a supply voltage of 5V, high efficiency is possible.This lighting driver is mounted in the way of Surface Mount.8 pins are equipped with it.100mOhm is the resistance of the lighting driver.When this is the case, the output current is set to 500mA.It is self-contained in an econtainer with a capacity of Peripheral Drivers.In order to operate normally, the supply voltage (Vsup) must remain above 3V.You can select from 2 channels.In this part, the power supply is set to 5V.As far as input voltage goes, its maximum is 5.5V volts.The input voltage minimum is 2.7V volts.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.A minimum working temperature of -25°C degrees Celsius is required to ensure its reliability.With this LED driver, CONTROL LOGIC: ACTIVE LOW can also be produced.The interface to the LED driver is of type BUFFER OR INVERTER BASED PERIPHERAL DRIVER.
BD6513F-E2 Features
Supplied from 5V
Resistance of 100mOhm
2 channels
Additional features like CONTROL LOGIC: ACTIVE LOW
BD6513F-E2 Applications
There are a lot of ROHM Semiconductor BD6513F-E2 Power Switches ICs applications.
- Solid-State Drives
- Set-Top Boxes
- Hot-Swap Systems
- USB3.1 Power Delivery
- Wearable Devices
- Gaming
- Hot Swap
- Portable GPS Device
- HDD and SSD
- Hard Disk Drives
