BD6516F-E2
| Parameters | |
|---|---|
| Interface | On/Off |
| Operating Supply Current | 100μA |
| Output Configuration | High Side |
| Power Dissipation | 560mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 3V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 6000 µs |
| Output Peak Current Limit-Nom | 1.65A |
| Rds On (Typ) | 110m Ω |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 560mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | BD651* |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 3V |
BD6516F-E2 Overview
Tape & Reel (TR) is how it's packaged.This file is included in package 8-SOIC (0.173, 4.40mm Width).In this case, the LED driving board is mounted as Surface Mount.The switch type is USB Switch.It is recommended that the temperature be set to -25°C~85°C TA for reliable operation.The lighting driver has a total of 2 outputs that are available for use.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage is N-Channel volts.There are Status Flag features available on the LED driving board.There is a BD651* family of things that it belongs to.A total of 8 terminations have been found in it.For operation, we use the 8 pins.It has 2 functions.Maximum output current falls to 500mA when operation criteria are met.The supply voltage can be 5V for high efficiency.It is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 8 pins.When this case is used, the output current is set to 500mA.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.For normal operation, the supply voltage (Vsup) should be kept above 3V.The power supply of the part is 5V.This LED driver can handle voltages up to 5.5V volts.As a minimum input voltage, it requires 2.7V volts.
BD6516F-E2 Features
Supplied from 5V
BD6516F-E2 Applications
There are a lot of ROHM Semiconductor BD6516F-E2 Power Switches ICs applications.
- HDD and SSD
- USB Power Distribution
- Wireless Headsets
- Solid-State Drives
- Set-top-box
- Gaming
- PC Cards
- Telecom and Network Systems
- USB Power Distribution
- PDAs
