BD6520F-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 560mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | BD652* |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 110μA |
| Output Configuration | High Side |
| Power Dissipation | 560mW |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Max Output Voltage | 6.3V |
| Switch Type | General Purpose |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.22mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3V~5.5V |
| Fault Protection | Over Temperature, UVLO |
| Rds On (Typ) | 50m Ω |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD6520F-E2 Overview
It is package in Tape & Reel (TR) case.There is a 8-SOIC (0.173, 4.40mm Width) package that includes it.The LED driver is mounted as Surface Mount.A General Purpose switch type is owned by it.It is recommended to set the temperature to -25°C~85°C TA in order to ensure reliable operation.The LED driver has 1 outputs.A supply voltage of Not Required is required for it to operate.Voltage output is N-Channel volts at maximum.Features of the lighting driver are Load Discharge, Slew Rate Controlled.The BD652* family consists of this type.As a result, there are 8 terminations.In order to operate, the 8 pins are used.As far as the lighting driver is concerned, there are 1 functions.This operation requires the maximum output current to be decreased to 2A.It is possible to obtain high efficiency with a supply voltage of 5V.The lighting driver is mounted in the direction of Surface Mount.In total, it has 8 pins.In this case, the output current will be set to 2A.There is a Power Management Circuits capacity container for this LED driver that is self-contained.Normal operation requires a voltage above 3V for the supply voltage.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.In total, there are 1 channels available.This part is powered by 5V.Its maximum input voltage is 5.5V volts.The input voltage minimum is 3V volts.A maximum supply current of 0.22mA is available for operation.
BD6520F-E2 Features
Supplied from 5V
1 channels
BD6520F-E2 Applications
There are a lot of ROHM Semiconductor BD6520F-E2 Power Switches ICs applications.
- Portable Video Game Players
- Solid-State Drives
- Hot Swap
- Storage Drives
- PC Cards
- Set-Top Boxes
- HDD, SSD
- PDAs
- Smart Phones, Feature Phones
- Handheld Devices
