BD6522F-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 560mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | BD652* |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Voltage | 3V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 110μA |
| Output Configuration | High Side |
| Power Dissipation | 560mW |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Max Output Voltage | 6V |
| Switch Type | General Purpose |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.22mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3V~5.5V |
| Fault Protection | Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 50m Ω |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD6522F-E2 Overview
Tape & Reel (TR) is how it's packaged.Package 8-SOIC (0.173, 4.40mm Width) contains it.It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -25°C~85°C TA for reliable performance.In this LED driver, there are no outputs available.A supply voltage of Not Required is required for it to operate.It has a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Load Discharge, Slew Rate Controlled.There is a BD652* family of things that it belongs to.The termination count is 8.The 8 pins are used for the operation of the system.The LED driver has 1 functions.The maximum output current drops to 2A in order to meet the operation criteria.A supply voltage of 5V leads to high efficiency.In this case, it is mounted in the way of Surface Mount.8 pins are equipped with it.It has 50mOhm resistance.The output current is set to 2A in this case.There is a Power Management Circuits capacity container for this LED driver that is self-contained.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.There are a total of 1 available channels.This part has a power supply of 5V volts.A maximum input voltage of 5.5V volts can be applied to it.As a minimum input voltage, it requires 3V volts.It has a maximum supply current of 0.22mA.
BD6522F-E2 Features
Supplied from 5V
Resistance of 50mOhm
1 channels
BD6522F-E2 Applications
There are a lot of ROHM Semiconductor BD6522F-E2 Power Switches ICs applications.
- Mobile Communication Devices
- Solid-State Drives
- Set-Top Boxes
- Portable Devices
- PC Cards
- PDAs
- Notebook and Tablet Computers
- USB Ports/Hubs
- Wireless Modem Data Cards
- Telecom and Network Systems
