BD6538G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 200mOhm |
| Max Power Dissipation | 670mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BD6538 |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 150m Ω |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
BD6538G-TR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The SC-74A, SOT-753 package contains it.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type it owns.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.By default, it is set to output 1.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.In terms of features, the LED driving board has Slew Rate Controlled, Status Flag.The BD6538 family contains this object.The termination count is 5.It has 1 functions.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.A supply voltage of 5V leads to high efficiency.A total of 5 pins are present on it.In this LED driving board, there is 200mOhm resistance.When this is the case, the output current is set to 500mA.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 2.7V.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 available channels.
BD6538G-TR Features
Supplied from 5V
Resistance of 200mOhm
1 channels
BD6538G-TR Applications
There are a lot of ROHM Semiconductor BD6538G-TR Power Switches ICs applications.
- Set-Top Boxes
- Portable GPS Device
- Telecom and Network Systems
- Set-top-box
- Hot Swap
- Portable Devices
- HDD, SSD
- USB Ports/Hubs
- Wireless/Networking Cards
- Portable GPS
