BD6590MUV-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2011 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 1.5MHz |
| Pin Count | 24 |
| JESD-30 Code | S-XQCC-N24 |
| Number of Outputs | 6 |
| Input Voltage-Nom | 5V |
| Voltage - Output | 40V |
| Input Voltage (Min) | 4.5V |
| Topology | Step-Up (Boost) |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.03A |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Current - Output / Channel | 30mA |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 4.5V |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
BD6590MUV-E2 Overview
In order to save board space, the led driver uses the 24-VFQFN Exposed Pad package. A LED driver with 6 outputs is designed.The mounting method adopted is Surface Mount.With high reliability and efficiency, this emerges as a DC DC Controller.It is capable of operating at a temperature of -40°C~85°C TA. The benefits are considerable for Backlight.The system operates on the basis of the frequency 1.5MHz.It is designed to work with 24 terminations.A voltage supply below 4.5V may cause undetermined failures.The output voltage of this device is 40V.It consists of 24 pins.This value is designed to support a maximum of 5.5V.The circuit is assigned 5V volts when the device is in operation.Input voltages higher than or equal to 4.5V make its operation much more convenient.Maintaining a low input voltage can ensure a high level of stability.It is not recommended to exceed 0.03A in the output current.
BD6590MUV-E2 Features
Available in the 24-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.5MHz
BD6590MUV-E2 Applications
There are a lot of ROHM Semiconductor BD6590MUV-E2 LED Driver ICs applications.
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Auxiliary lights for on-vehicle cameras
- Scanners and Handy Terminals
- Portable lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED Lightings for Inspection Devices
- Refrigeration lighting
- OLED power supply for portable equipment
- LED headlights
- Linear fluorescent
