BD6643KN-E2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN |
| Number of Pins | 48 |
| Operating Temperature | -25°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Applications | General Purpose |
| Technology | DMOS |
| Voltage - Supply | 2.1V~6.5V |
| Terminal Position | QUAD |
| Supply Voltage | 2.2V |
| Terminal Pitch | 0.4mm |
| Base Part Number | BD6643 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Max Output Current | 2A |
| Operating Supply Voltage | 2.2V |
| Number of Channels | 4 |
| Interface | Parallel |
| Output Configuration | Half Bridge (10) |
| Current - Output | 500mA |
| Voltage - Load | 3V~13V |
| Fault Protection | Over Temperature, Reverse Current |
| Drive Type | WINCHESTER |
| Motor Type - AC, DC | Brushless DC (BLDC), Brushed DC |
| Height Seated (Max) | 0.95mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
BD6643KN-E2 Overview
The package contains [0].The part is packged with 48-VFQFN case.To mount the part by [0], it is recommended that you do so.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.The device is capable of supplying a voltage of 2.1V~6.5V volts.There is a temperature range of -25°C~150°C TJin which this device operates.There is a motor type Brushless DC (BLDC), Brushed DCavailable.In this part, there are 48 terminations available.Voltage can be applied at a rate of 3V~13V volts to the load.Drivers controllers is important to remember that this amplifier should be run at 2.2V.Its recommended mounting way is Surface Mount.The output current should remain at 500mA.According to the BD6643part number, the part is found.48pins are present on the device.Drivers controllers is possible to access 1outputs.This driver operates from a supply voltage of 2.2V.For optimal operation, its maximum output current reaches [0].The device has a total of 4channels.
BD6643KN-E2 Features
Applications : General Purpose
Load voltage across the chip 3V~13V
base on BD6643 number
designed with 1 outputs
BD6643KN-E2 Applications
There are a lot of ROHM Semiconductor BD6643KN-E2 motor drivers applications.
- Horticultural applications
- Display LED backlighting
- Monitoring the energy that the luminaire uses
- Indicator circuit
- CHMSL (center high-mount stop lamps)
- Arena lighting
- Charge pump circuits
- Human-centric lighting
- Mobile phone display backlight and key light driving
- Outdoor area lights
