BD8108FM-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOP (0.295, 7.50mm Width) + 2 Heat Tabs |
| Number of Pins | 28 |
| Supplier Device Package | 28-HSOP-M |
| Operating Temperature | -40°C~95°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | DC DC Controller |
| Max Operating Temperature | 95°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight |
| Frequency | 550kHz |
| Base Part Number | BD8108 |
| Number of Outputs | 4 |
| Max Output Current | 150mA |
| Operating Supply Voltage | 28V |
| Max Supply Current | 6mA |
| Voltage - Output | 36V |
| Topology | Step-Up (Boost) |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Voltage - Supply (Max) | 30V |
| Voltage - Supply (Min) | 4.5V |
| RoHS Status | ROHS3 Compliant |
BD8108FM-E2 Overview
The 28-SOP (0.295, 7.50mm Width) + 2 Heat Tabs package is used for saving board space. LED drivers use 4 outputs for their design.It adopts the way of Surface Mount for mounting.It is highly performing and reliable when it emerges as a DC DC Controller.The LED driver has the capability of operating at a temperature of -40°C~95°C TA.Backlight has considerable advantages.It operates on the basis of the frequency of 550kHz.The configuration of the board is built around 28 pins.If the voltage supply is lower than 4.5V, undetermined failures may occur.Surface Mount is mounted in the way.The LED driver is based on part number BD8108.36V is the output voltage.It is designed to provide a supply voltage of 30V at its maximum.When the maximum supply current is less than 6mA, this device is able to provide high efficiency.Operating temperatures should not exceed 95°C in order to ensure stable operation.For stable operation, the operating temperature should be higher than -40°C.It is necessary to use 28V voltage to power systems.A LED driver that operates at 150mA output current provides all the benefits of a LED driver.
BD8108FM-E2 Features
Available in the 28-SOP (0.295, 7.50mm Width) + 2 Heat Tabs package
Operating temperature of -40°C~95°C TA
Frequency of 550kHz
Operating with the supply voltage of 28V
BD8108FM-E2 Applications
There are a lot of ROHM Semiconductor BD8108FM-E2 LED Driver ICs applications.
- Sports Facility Lighting
- Panel lighting
- Portable lighting
- Flicker-free LED Lighting using R1580N
- Gallery lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Street lighting
- OLED power supply for portable equipment
- Architectural lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
