BD82001FVJ-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 110MOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 1.5A |
| Time@Peak Reflow Temperature-Max (s) | 10 |
| Base Part Number | BD82001 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 70m Ω |
| Turn Off Time | 40 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD82001FVJ-E2 Overview
The package is in the form of a Tape & Reel (TR).There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package that includes it.This lighting drivere has a mounting type of Surface Mount.There is a USB Switch switch type associated with it.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.It is possible to use 1 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.A lighting driver with Slew Rate Controlled, Status Flag features is available.This object belongs to the BD82001 family.It has a total of 8 terminations.The operation is performed through the 8 pins.It is important to note that the LED driving board has 1 functions.This operation requires the maximum output current to be decreased to 1A.A supply voltage of 5V leads to high efficiency.It is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 8 pins.Currently, the LED driving board has 110MOhm resistance.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).Normal operation requires a voltage above 2.7V for the supply voltage.This part has a power supply of 5V volts.
BD82001FVJ-E2 Features
Supplied from 5V
Resistance of 110MOhm
BD82001FVJ-E2 Applications
There are a lot of ROHM Semiconductor BD82001FVJ-E2 Power Switches ICs applications.
- Set-top-box
- USB Protection
- Wearable Devices
- Wireless Headsets
- Mobile Communication Devices
- Portable Music Players
- Hard Disk Drives
- Hot Swap
- USB Ports/Hubs
- Notebook PC
