BD82004FVJ-MGE2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2015 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Interface | On/Off |
| Current - Output (Max) | 2A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| RoHS Status | ROHS3 Compliant |
BD82004FVJ-MGE2 Overview
Cut Tape (CT) is how it's packaged.Package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) contains it.It has been mounted as Surface Mount on the LED driver.There is a switch type of USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 1.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be achieved by this LED driver.In this case, the LED driving board can produce only 2AV as its maximum output.To comply with the operation criteria, the maximum output current is reduced to 1A.
BD82004FVJ-MGE2 Features
BD82004FVJ-MGE2 Applications
There are a lot of ROHM Semiconductor BD82004FVJ-MGE2 Power Switches ICs applications.
- USB Power Distribution
- Solid State Drivers
- Notebook and Tablet Computers
- Gaming
- Portable GPS Device
- PC Card Hot Swap
- Hot-Swap Systems
- USB Protection
- Wearable Devices
- HDD, SSD
