BD82022FVJ-E2

N-Channel PMIC BD82022 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: ROHM Semiconductor
Nocochips NO: 687-BD82022FVJ-E2
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 202
Description: N-Channel PMIC BD82022 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Weight	157.991892mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
Feature	Load Discharge, Status Flag
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	90mOhm
Max Power Dissipation	587.5mW
Peak Reflow Temperature (Cel)	260
Time@Peak Reflow Temperature-Max (s)	10
Base Part Number	BD82022
Number of Outputs	1
Output Type	N-Channel
Max Output Current	2A
Interface	On/Off
Analog IC - Other Type	SPST
Output Configuration	High Side
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Turn On Delay Time	20 ms
Switch Type	USB Switch
Nominal Input Voltage	5.5V
Turn-Off Delay Time	40 μs
Ratio - Input:Output	1:1
Voltage - Load	2.8V~5.5V
Fault Protection	Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Rds On (Typ)	90m Ω
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

BD82022FVJ-E2 Overview

It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package that includes it.A Surface Mount mounting is used for the LED driving board.USB Switch is the type of switch owned by it.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The LED driver is equipped with 1 outputs.The LED driving board operates at Not Required volts.It produces a maximum output voltage of N-Channel volts at its maximum output.As far as features are concerned, the LED driving board has Load Discharge, Status Flag.The BD82022 family consists of this type.This operation requires the maximum output current to be decreased to 2A.Surface Mount is mounted in the way of this lighting driver.In this case, there is 90mOhm resistance in the LED driving board.The gadget uses an analog IC, which is SPST in this case.