BD82030FVJ-GE2

N-Channel PMIC BD82030 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: ROHM Semiconductor
Nocochips NO: 687-BD82030FVJ-GE2
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 746
Description: N-Channel PMIC BD82030 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Weight	157.991892mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2014
Feature	Load Discharge, Status Flag
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	72mOhm
Max Power Dissipation	580mW
Peak Reflow Temperature (Cel)	260
Time@Peak Reflow Temperature-Max (s)	10
Base Part Number	BD82030
Number of Outputs	1
Output Type	N-Channel
Max Output Current	1.5A
Interface	On/Off
Analog IC - Other Type	SPST
Output Configuration	High Side
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Turn On Delay Time	20 ms
Switch Type	USB Switch
Nominal Input Voltage	5V
Turn-Off Delay Time	20 μs
Ratio - Input:Output	1:1
Voltage - Load	4.5V~5.5V
Fault Protection	Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Rds On (Typ)	72m Ω
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

BD82030FVJ-GE2 Overview

The LED driver's packaged as a Tape & Reel (TR).There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package that includes it.The mounting type of the LED driver is Surface Mount.The switch type is USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.The maximum output voltage is N-Channel volts.The lighting driver has Load Discharge, Status Flag features.I believe it belongs to the BD82030 family.This operation requires the maximum output current to be decreased to 1.5A.This lighting driver is mounted in the way of Surface Mount.In this LED driving board, there is 72mOhm resistance.In this lighting driver, SPST is the analog IC.