BD82031FVJ-GE2

N-Channel PMIC BD82031 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: ROHM Semiconductor
Nocochips NO: 687-BD82031FVJ-GE2
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 623
Description: N-Channel PMIC BD82031 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Weight	157.991892mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2014
Feature	Load Discharge, Status Flag
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	72mOhm
Max Power Dissipation	580mW
Peak Reflow Temperature (Cel)	260
Time@Peak Reflow Temperature-Max (s)	10
Base Part Number	BD82031
Number of Outputs	1
Output Type	N-Channel
Max Output Current	1.5A
Interface	On/Off
Analog IC - Other Type	SPST
Output Configuration	High Side
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Turn On Delay Time	20 ms
Switch Type	USB Switch
Nominal Input Voltage	5V
Turn-Off Delay Time	20 μs
Ratio - Input:Output	1:1
Voltage - Load	4.5V~5.5V
Fault Protection	Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Rds On (Typ)	72m Ω
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

BD82031FVJ-GE2 Overview

Tape & Reel (TR) is how it's packaged.In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it is included.In this case, the LED driving board is mounted as Surface Mount.The switch type of this switch is USB Switch.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.As a default, the output is set to 1.Operation is based on a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.There are Load Discharge, Status Flag features available on the LED driving board.It comes under the family of BD82031.In order to meet the operation criteria, the maximum output current drops to 1.5A.Surface Mount is mounted in the way of this lighting driver.There is 72mOhm resistance on the LED driver.It uses an analog IC, which is SPST.