BD82032FVJ-GE2

N-Channel PMIC BD82032 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: ROHM Semiconductor
Nocochips NO: 687-BD82032FVJ-GE2
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 591
Description: N-Channel PMIC BD82032 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Weight	157.991892mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2014
Feature	Load Discharge, Status Flag
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	72mOhm
Max Power Dissipation	587.5mW
Peak Reflow Temperature (Cel)	260
Time@Peak Reflow Temperature-Max (s)	10
Base Part Number	BD82032
Number of Outputs	1
Output Type	N-Channel
Max Output Current	2A
Interface	On/Off
Analog IC - Other Type	SPST
Output Configuration	High Side
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Turn On Delay Time	20 ms
Switch Type	USB Switch
Nominal Input Voltage	5V
Turn-Off Delay Time	20 μs
Ratio - Input:Output	1:1
Voltage - Load	4.5V~5.5V
Fault Protection	Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Rds On (Typ)	72m Ω
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

BD82032FVJ-GE2 Overview

As you can see, it's packaged in the way of a Tape & Reel (TR).It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package as well.This lighting drivere has a mounting type of Surface Mount.There is a USB Switch switch type associated with it.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver is equipped with 1 outputs.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It has a total of Load Discharge, Status Flag features.There is a BD82032 family of things that it belongs to.This results in the maximum output current dropping to 2A to meet the operation criteria.As a result, it is mounted in the manner of Surface Mount.It has 72mOhm resistance.It uses an analog IC, which is SPST.