BD82061FVJ-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 587.5mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BD82061 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Nominal Supply Current | 110μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ms |
| Switch Type | USB Switch |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 70m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD82061FVJ-E2 Overview
It is packaged in the form of a Tape & Reel (TR).It is included in the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Surface Mount is the mounting type of the LED driver.There is a switch type of USB Switch.To ensure reliable operation, set the temperature to -40°C~85°C TA.There is a default setting of 1 for output.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage is N-Channel volts.Slew Rate Controlled, Status Flag features are available on the lighting driver.As you can see, it comes from the BD82061 family.The termination count is 8.The LED driver has 1 functions.To meet the operation criteria, the maximum output current drops to 1.5A.The supply voltage can be 5V for high efficiency.The LED driver has a total of 8 pins.Currently, the LED driving board has a resistance of 110mOhm ohms.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).Normal operation requires Vsup above 2.7V.5V is the power supply of the part.
BD82061FVJ-E2 Features
Supplied from 5V
Resistance of 110mOhm
BD82061FVJ-E2 Applications
There are a lot of ROHM Semiconductor BD82061FVJ-E2 Power Switches ICs applications.
- HDD and SSD
- Hot-Swap Systems
- Notebook and Tablet Computers
- USB Protection
- Portable Video Game Players
- Wearable Devices
- Portable Devices
- Various applications equipped with buttons
- Gaming
- Solid-State Drives
