BD82065FVJ-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 580mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 2.4A |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BD82065 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.1 ms |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 70m Ω |
| Turn Off Time | 40 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD82065FVJ-E2 Overview
Tape & Reel (TR) is how it's packaged.It's included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.This LED driving board is mounted using the mounting type Surface Mount.USB Switch is the switch type that it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.By default, it is set to output 1.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage is N-Channel volts.It has a total of Slew Rate Controlled, Status Flag features.There is a BD82065 family of things that it belongs to.The termination count is 8.8 pins are used for operation.The LED driving board has a total of 1 functions.The maximum output current drops to 1.5A in order to meet the operation criteria.A supply voltage of 5V leads to high efficiency.It is positioned in the direction of Surface Mount.As a result, it has a total of 8 pins.Currently, the LED driving board has a resistance of 110mOhm ohms.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.Normal operation requires a voltage above 2.7V for the supply voltage.In this part, the power supply is set to 5V.
BD82065FVJ-E2 Features
Supplied from 5V
Resistance of 110mOhm
BD82065FVJ-E2 Applications
There are a lot of ROHM Semiconductor BD82065FVJ-E2 Power Switches ICs applications.
- Set-Top Boxes
- Portable Video Game Players
- HDD and SSD
- Portable Devices
- Portable/Handheld Devices
- PC Card Hot Swap
- Portable GPS Device
- Wireless/Networking Cards
- Portable Music Players
- Notebook PC
