BD8303MUV-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 50.008559mg |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 10 |
| Base Part Number | BD830* |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 12V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 7.4V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20μA |
| Voltage - Supply (Vcc/Vdd) | 2.7V~14V |
| Control Features | Enable, Frequency Control |
| Max Output Voltage | 12V |
| Topology | Buck-Boost |
| Min Input Voltage | 2.7V |
| Frequency - Switching | 200kHz~1MHz |
| Max Input Voltage | 14V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.8V |
| Max Duty Cycle | 90 % |
| Clock Sync | No |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD8303MUV-E2 Overview
As a result of 16-VFQFN Exposed Pad compact design, the switching controller is compatible with most applications. dc motor controller is suitable for 2 output generation. Tape & Reel (TR) solid enclosure protects the pmic. The program can handle Transistor Driver dc switching's outputs (s). 2.7V~14V is the operating voltage and supply voltage of the dc control. Worked in a -25°C~85°C TA dc switcher before. The switching controller is capable of switching at the 200kHz~1MHz position. The Surface Mount makes it ideal for general dc dc regulator. Enable, Frequency Control is used for efficient switching control in the dcdc regulator. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. The switching converters's terminal (s) are designed at QUAD . Various 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. 7.4V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "BD830*". There are a total of 16 pins on switching converter. Statistically, the DC regulator outputs 12V voltage. normally, the dc dc regulator's output current is 20μA, which you should keep in mind when starting a project. It is set to 90 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThe maximum input voltage of this dc switcher is 14V, so users must limit the voltage accordingly. A voltage of 2.7V must be present in the supply. Its datasheet indicates the switching converter can output a maximum of 12V volts. There is 1.8V voltage output lower than 1.8V on the voltage controller.
BD8303MUV-E2 Features
Transistor Driver Outputs
Switching Frequency: 200kHz~1MHz
Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
BD8303MUV-E2 Applications
There are a lot of ROHM Semiconductor BD8303MUV-E2 DC to DC converter applications.
- Television equipment
- Computer-related products
- Household control circuits
- Laboratories
- Handheld GPS
- Arc suppression circuits
- Surge protection circuits
- Medical equipment
- Gear/thread machining machines
- Various CNC machine tools
