BD8LA700EFV-CE2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-VSSOP (0.220, 5.60mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2016 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G24 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | SPI |
| Current - Output (Max) | 200mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 4:8 |
| Voltage - Load | 3V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 50 µs |
| Rds On (Typ) | 1.3 Ω |
| Turn Off Time | 50 µs |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1mm |
| Width | 5.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD8LA700EFV-CE2 Overview
Cut Tape (CT) is how it's packaged.The 24-VSSOP (0.220, 5.60mm Width) Exposed Pad package includes it.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type it owns.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The lighting driver has a total of 8 outputs that are available for use.With a supply voltage of 3V~5.5V, the LED driving board operates.It produces a maximum output voltage of N-Channel volts at its maximum output.It contains 24 terminations.The LED driving board has a total of 1 functions.In this case, the LED driving board can produce only 200mAV as its maximum output.High efficiency is possible at 5V supply voltage.There is an electrical component included in the Automotive, AEC-Q100 series.For normal operation, the supply voltage (Vsup) must be kept above 4V.
BD8LA700EFV-CE2 Features
Supplied from 5V
BD8LA700EFV-CE2 Applications
There are a lot of ROHM Semiconductor BD8LA700EFV-CE2 Power Switches ICs applications.
- Set-Top Boxes
- PC Card Hot Swap
- PDAs
- USB Power Distribution
- PC Cards
- Telecom and Network Systems
- Wireless/Networking Cards
- USB Power Distribution
- Notebook PC
- Wireless Modem Data Cards
